UV Lasers

Visible DPSS Lasers

Visible Diode collimated Lasers

Infrared DPSS Lasers

Infrared Diode collimated Lasers

Low Noise Lasers

  457nm Low Noise Lasers

  473nm Low Noise Lasers

  532nm Low Noise Lasers

  593nm Low Noise Lasers

  671nm Low Noise Lasers

  946nm Low Noise Lasers

  1064nm Low Noise Lasers

      1064 LN Lasers (100-300mW)

      1064 LN Lasers (500-1200mW)

      1064 LN Lasers (2W-3W)

      1064 LN Lasers (4W-10W)

  1342nm Low Noise Lasers

Single Longitude Mode Lasers

Q-switched / Pulsed Lasers

RGB / RG Lasers

Fiber Lasers

Laser Pointers

Laser Collimator

Laser Scanner System

Laser Accessory

DPSS 1064nm Low Noise Infrared Lasers

Dream Lasers designs and manufactures cost effective ultra-compact Diode Pumped Solid State Low Noise Lasers, Our lasers feature with high reliability, high stability, high efficiency, low noise and excellent laser beam quality. These lasers are specificly designed for OEM, scientific and industrial use.

A diode-pumped solid-state (DPSS) 1064nm Low Noise Infraed Lasers has the beam quality of a gas laser and the small size and efficiency of a diode laser, with single-line output in the Infraed (1064nm). As part of this DPSS laser design, a standard semiconductor diode laser is used to optically pump a small chip of lasing material to generate a fundamental frequency. For green light, a frequency-doubling crystal is inserted into the laser cavity. Finally, extracavity beam conditioning optics are added to enlarge and collimate the beam.
DPSS 1064nm Low Noise Infraed Lasers are available for a range of laboratory and industrial applications. Our DPSS (diode pumped solid state) lasers are widely used in application areas such as biotechnology,semiconductor instrumentation, inspection, material processing and reprographics.

The laser longevity curve:808nm Laser Diode (DL-808-LD-005) : <1>

The DreamLasers Laser power stability test : <2>


                                 <1>                                                                                           <2>

See the Glossary and Technology for information about the terms used
In the front of the laser, we add an infrared filter. The residual IR part is less than 10-3. Please refer to the technology page for more information about the filter.
Other Sytles and custom designs are available. Contact us to discuss your needs.

Home | Company Profile | Lasers | Optics | Crystals | Support | Contact
Copyright © 2002-2008 by Shanghai Dream Lasers Technology Co., Ltd. .