Introduce
UV
Lasers
Visible
DPSS Lasers
Visible Diode collimated Lasers
Infrared DPSS Lasers
Infrared Diode collimated Lasers
Low
Noise Lasers
Single
Longitude Mode Lasers
473nm Single Longitude Mode Lasers
532nm Single Longitude Mode Lasers
671nm Single Longitude Mode Lasers
1064nm Single Longitude Mode Lasers
Q-switched / Pulsed Lasers
RGB
/ RG Lasers
Fiber Lasers
Laser Pointers
Laser Collimator
Laser
Scanner System
Laser
Accessory |
| DPSS
1064nm Single Longitude Mode Infrared Laser |
 |
|
|
| Specifications: |
|
Model |
SDL-1064-SLM-XXXT |
| Output
Power |
1-1000mW |
| Wavelength |
1064nm |
| Operation
Mode |
CW,
TEM00 , Single Longitude Mode |
| Beam Diameter at the aperture |
~2.0mm |
| Power Stability after warm-up |
<1%, <3%, <5%
(over
2/4/8 hours) |
| Noise of amplitude |
<0. 5% (rms, 1~20MHz) |
| Beam
Divergence (1/e2, Full Angle) |
<1.5mrad |
| Spectra
Linewidth |
<0.0001nm |
| Point Stability after warm-up |
<0.05mrad |
| M2 factor |
<1. 5 |
| Beam height from base plate (mm) |
24. 8mm |
| Coherent length (m) |
>50M |
| Dimension
of laser head |
142 ¡Á 73 ¡Á 46mm |
| Power
Supply |
SDL-PS-300 |
| Input
Voltage |
90~264VAC,
50/60Hz |
| Operating
Temperature |
10¡æ¡«35¡æ |
| Dimensions
of power supply |
133 ¡Á 130 ¡Á 62mm |
| Warm-up time |
<15 minutes |
| Polarization ratio |
>50:1(45 degree) |
| Expected Lifetime (hours) |
10000 hours |
| Warranty time |
1 year |
| Note: |
 |
See
the
Glossary and Technology
for information about the terms
used |
|
In
the front of the laser, we add
an infrared filter. The residual
IR part is less than 10-3. Please
refer to the
technology page for more information
about the filter. |
|
Other
Sytles and custom designs are
available. Contact us to discuss
your needs. |
|
|
|
|
|
|
