| Specifications: |
| Model |
|
SDL-515-XXXT |
| Output
Power |
|
1
- 5mW |
| Wavelength |
|
515 ¡À1nm |
| Operation
Mode |
|
CW, TEM00 |
| M2 factor |
|
<1. 2 |
| Linear
Polarization |
|
>50:1 |
| Beam Diameter at the aperture |
|
~2.0mm |
| Beam
Divergence (1/e2, Full Angle) |
|
<
1.5mrad |
| Power Stability after warm-up |
|
<1%, <3%, <5%
(over
2/4/8 hours) |
| Point Stability after warm-up |
|
<
0.05mrad |
| Warm-up time |
|
<10
minutes |
| Dimension
of laser head |
|
142
x 73 x 46mm |
| Power
Supply |
|
SDL-PS-300 |
| Input
Voltage |
90-264VAC or 5VDC,
50/60Hz |
| Operating
Temperature |
|
10¡æ ~ 35¡æ |
| Beam height from base plate (mm) |
|
24. 8mm |
| Modulation |
|
TTL Modulation or analog Modulation |
| Expect life time |
10000
hours |
| Warranty time |
1 year |
| Note:
|
 |
See
the
Glossary and Technology
for information about the terms
used |
|
In
the front of the laser, we add
an infrared filter. The residual
IR part is less than 10-3. Please
refer to the
technology page for more information
about the filter. |
|
Other
Sytles and custom designs are
available. Contact us to discuss
your needs. |
|
|
|
