Introduce
UV
Lasers
Visible
DPSS Lasers
Visible Diode collimated Lasers
Infrared DPSS Lasers
Infrared Diode collimated Lasers
Low
Noise Lasers
457nm
Low
Noise Lasers
473nm Low
Noise Lasers
532nm Low
Noise Lasers
593nm Low
Noise Lasers
671nm
Low
Noise Lasers
946nm Low
Noise Lasers
1064nm Low
Noise Lasers
1342nm Low
Noise Lasers
Single
Longitude Mode Lasers
Q-switched / Pulsed Lasers
RGB
/ RG Lasers
Fiber Lasers
Laser Pointers
Laser Collimator
Laser
Scanner System
Laser
Accessory |
| DPSS
946nm Low Noise Infrared Laser |
| Specifications:
|
|
Model |
SDL-946-LN-XXXT |
|
Wavelengthut
|
946nm |
|
Operation Mode |
CW, TEM00 |
|
Output Power @ 25 ¡æ |
1~500mW |
|
M2 factor |
<1.5 |
|
Power Stability after warm-up |
<1%, <3%, <5%
(over
2/4/8 hours) |
|
Noise of amplitude |
<1% (RMS, 10Hz - 20MHz) |
|
Warm-up time |
<15 minutes |
|
Beam divergence (1/e2, Full Angle) |
<1.5mrad |
|
Beam diameter at the aperture |
< 2mm |
| Coherent Length |
>1M |
|
Spectral line width |
<0.1nm |
| Polarization ratio |
>100:1 (0 or 90 degree) |
|
Point stability after warm-up |
<0.05mrad |
|
Operating temperature |
10-35¡æ |
Dimension of laser head |
142 ¡Á 73 ¡Á 46mm |
| Power supply |
SDL-PS-300 |
| Dimension of power supply |
130 x 120 x 62mm |
| Expect life time |
10000 hours |
| Warranty time |
1 year |
| |
|
|
|
|
|
|
|
| Note:
|
 |
See
the
Glossary and Technology
for information about the terms used |
|
In
the front of the laser, we add an infrared
filter. The residual IR part is less
than 10-3. Please refer to the
technology page for more information
about the filter. |
|
Other
Sytles and custom designs are available.
Contact us to discuss your needs. |
|
|
|
|
|
